Max-R Series 200

Features & Benefits

The foamed-in-place process of manufacturing panels on a continuous line produces a superior panel with uniform quality

The polyurethane foam core bonds to the steel skin and prevents interstitial condensation while delivering unsurpassed insulating protection

The panel´s arrive on-site complete and ready for installation

The panel´s tongue-and-groove, hidden fastener joint system, eliminates the use of through fasteners on most projects

Warranties

20 Year Limited Warranty - All building panels furnished by Metecno-Aluma Shield shall be free from defects in material and workmanship for a period of one year from date of shipment. The terms and conditions of any Metecno-Aluma Shield warranty shall be in accordance with those stated on the full written warranty.

More Details...

Coil Coatings Warranty - PPG DURANAR® - This agreement applies to any purchase from PPG by the Customer, or for it by a PPG approved coil coater (the"Coater"), of a Duranar® coil coating listed below (the "Product") which the Customer applies, or has applied for it by the Coater, to the exterior of a metal substrate listed for the Product which is used for an interior wall or ceiling or exterior architectural roofing or sidewall building product (the "Metal Substrate").

More Details...

Coil Coatings Warranty - PPG DURAFIN® - This agreement applies to any purchase from PPG by the Customer, or for it by a PPG approved coil coater (the"Coater"), of a Durafin 2000® coil coating listed below (the "Product") which the Customer applies, or has applied for it by the Coater, to a properly cleaned, chemically treated and primed metal substrate which is used for an interior wall or ceiling or exterior architectural sidewall (panel inclined not more than twenty (20) degrees from vertical) building product (the "Metal Substrate").

More Details...

Storage

All exterior pre-painted surfaces of Metecno-Aluma Shield panels are covered with a protective film of polyethylene. This film should not be exposed for extended periods of direct sunlight, as this could render the subsequent removal of this film more difficult. Moisture between panels will cause oxidation of the painted surface to occur. Inspect the bundles for moisture. If a panel bundle contains moisture, it must be broken open to allow the panels to dry. Restack and cover the panels in a manner to allow free air circulation. Always secure (tie down) restacked panels to prevent unforeseen wind damage.

Complete Instructions

Installation

AW SERIES INSULATED COMPOSITE
WALL PANEL INSTALLATION MANUAL
INDUSTRIAL / COMMERCIAL APPLICATIONS
Effective Date: January, 2003

Complete Instructions

Maintenance

1. Proper installation and maintenance are extremely important in obtaining the very best service and appearance from pre-painted metal panels.

Complete Instructions

Recommended Uses

Insulated siding for pre-engineered and industrial buildings
Exterior walls on low temperature building applications (R-47 maximum insulation value)
The economical choice for use as insulated siding for pre-engineered and industrial buildings

Colors and Finishes

PPG Standard DURINAR® PVDF COLORS
Slate Gray	Surrey Beige

Colonial Red	Regal White*

Slate Blue	Evergreen

Dark Bronze	Sandstone

PPG Standard Durafin 2000™ COLORS
Imperial White*	Sandstone

Surrey Beige	* USDA Accepted

Sales Offices

Metecno-Aluma Shield insulated panels are available for delivery nationwide and abroad. Click the link below to locate a sales office near you.

View Sales Offices