Case Studies

FAQs

Find A Rep

Specifications

Warranty

MSDS

CADs

Technical Bulletins

Industry Links

Contacts

 

 


For Exterior Walls with the Look of Masonry - The AW-500 series wall panel provides a flush profile using a bold Azteco® embossing with no striations on the exterior side. It is available in widths of 42" and 36" standard maxim length at 48´. The tongue-and-groove joint configuration is the same as the AW-200 and AW-300 series panels. The use of the hidden fastener allows the exterior metal wall to simulate the smooth continuous look of masonry stucco making the project more appealing to architects and end users.

  AW500 Span Tables AW500 Technical Data AW500 Test Data

Features & Benefits

Thickness from 2" (R17.1) to 5" (R-39.4)´. Lightweight, the 2" panel weighs about 2.5 lbs. per square foot

Panels can be used for Cold Storage or Industrial/Commercial projects.

Tested and approved by the Factory Mutual full-scale corner test (ASTM-E84 and D1929)

Warranties

20 Year Limited Warranty - All building panels furnished by Metecno-Aluma Shield shall be free from defects in material and workmanship for a period of one year from date of shipment. The terms and conditions of any Metecno-Aluma Shield warranty shall be in accordance with those stated on the full written warranty.

More Details...
 
Coil Coatings Warranty - PPG DURANAR® - This agreement applies to any purchase from PPG by the Customer, or for it by a PPG approved coil coater (the"Coater"), of a Duranar® coil coating listed below (the "Product") which the Customer applies, or has applied for it by the Coater, to the exterior of a metal substrate listed for the Product which is used for an interior wall or ceiling or exterior architectural roofing or sidewall building product (the "Metal Substrate").

More Details...
 
Coil Coatings Warranty - PPG DURAFIN® - This agreement applies to any purchase from PPG by the Customer, or for it by a PPG approved coil coater (the"Coater"), of a Durafin 2000® coil coating listed below (the "Product") which the Customer applies, or has applied for it by the Coater, to a properly cleaned, chemically treated and primed metal substrate which is used for an interior wall or ceiling or exterior architectural sidewall (panel inclined not more than twenty (20) degrees from vertical) building product (the "Metal Substrate"). 

More Details...
 

Storage

All exterior pre-painted surfaces of Metecno-Aluma Shield panels are covered with a protective film of polyethylene. This film should not be exposed for extended periods of direct sunlight, as this could render the subsequent removal of this film more difficult. Moisture between panels will cause oxidation of the painted surface to occur. Inspect the bundles for moisture. If a panel bundle contains moisture, it must be broken open to allow the panels to dry. Restack and cover the panels in a manner to allow free air circulation. Always secure (tie down) restacked panels to prevent unforeseen wind damage. 

Complete Instructions

Installation

AW SERIES INSULATED COMPOSITE
WALL PANEL INSTALLATION MANUAL
INDUSTRIAL / COMMERCIAL APPLICATIONS
Effective Date:  January, 2003 

Complete Instructions

Maintenance

1. Proper installation and maintenance are extremely important in obtaining the very best service and appearance from pre-painted metal panels. 

Complete Instructions

Recommended Uses

  • For Exterior Walls with the Look of Masonry

Colors and Finishes

PPG Standard DURINAR® PVDF COLORS
Slate Gray

 Surrey Beige
Colonial Red

 Regal White*
Slate Blue

 Evergreen
Dark Bronze

 Sandstone
   
PPG Standard Durafin 2000™ COLORS
Imperial White*

 Sandstone
Surrey Beige
* USDA
Accepted

Sales Offices

Metecno-Aluma Shield insulated panels are available for delivery nationwide and abroad. Click the link below to locate a sales office near you.

View Sales Offices
© 2008 Metecno Panel Systems, Inc. - All Rights Reserved