The Overlap´s design make this the ideal door for blast freezer and extreme low temp applications. Metecno-Aluma Shield´s Overlap freezer doors are appropriate in a wide variety of applications. This door is most often used as a pedestrian traffic door for extreme low temperature, blast freezers, or any controlled environment.
Factory hung, tested and shipped ready for mounting at site
Exterior doors are coated with a PPG Durafin 2000™ High Performance Coating. The interior of cooler and freezer doors are coated with USDA accepted finish
Each cold storage door shall be securely crated so as to protect the door from damage during shipment and handling. Door identification number shall be clearly marked on the outside of each crate.
Doors shall be mounted in full accord with the detailed instruction of the door manufacturer and contract documents. When mounting the door and track framing, the mounting surfaces shall be set true and level without distortion and shall be shimmed and caulked to assure tightness and true fitting, and shall be securely lagged. After the doors are hung, they shall be checked for mechanical and electrical operation, and tight and uniform gasket sealing. Installation of pull switches, power connections to power operated doors and gasket heaters are the responsibility of the electrical contractor.
Clean all doors of excess sealant, grease, stain, fingerprints and construction dust prior to final inspection to the satisfaction of the architect/owner. Adjust all doors to smooth, proper operating condition, including proper sealing prior to turnover of facility to owner.
